To verify that the position of the fingers is correct:

    1. Choose a job and tab [1x] (envelope only).

    2. Tap the 'Envelope stop position' button.

    3. Lift the unlocking lever A of the upper unit and pull up the upper unit.

    4. Tap the arrow to move to the next screen.

    5. Follow the instructions on screen.
  1. If the insert fingers are not correct, adjust the fingers as follows:
    1. Loosen the knurled knob C on top of each finger.

    2. Adjust each finger so that the tip enters about 5 mm (0.2 inch) into the envelope.

    3. Re-tighten the knurled knob.

      The fingers can be moved sideways to the desired position.

    4. Place the outer fingers D about 5 to 10 mm (0.2 to 0.4 inch) from the edges of the envelope.

      1. Caution

        Check the position of the insert fingers when changing to a different type of envelope.

    5. Tap the envelope button on the touch screen to fetch another envelope. 

    6. Make sure that the finger position is correct. If not, repeat the steps for adjusting the fingers.

Date created:
09/10/2013 11:50:53
Last updated:
11/27/2017 03:36:10
DS-75i, DS-95i