You can switch the mail set thickness detection to 'yes' (= on) or 'no' (= off). By default the mail set thickness detection is set to 'yes'.

To change these settings:


    1. Select the job that you want the change the mail set thickness detection setting for.

      1. Note

        If the job uses reading, you cannot switch on the Mail Set Thickness Detection (DFC) for the document set. With reading, the document set size can be different for every set. 

    2. Tap [Edit].

    3. Navigate to Exit settings.

    4. Tap [Advanced].

    5. Tap the 'Double Feed Control' button to switch it on or off.

    6. Tap the 'Continue on double' button to switch it on or off.

      If Continue on double is on, the machine will not stop if two sheets are fed instead of one. The mail set that contains the double sheets will be presented on deck.

    7. Enter the 'Measurement area offset'.

      After the DFC detects the document set, it delays the thickness measurement. It starts measuring as soon as the offset has passed. 

Date created:
08/29/2013 09:50:45
Last updated:
11/27/2017 03:36:08
Product(range):
DS-90i, DS-95i
Print