Use the [System test] to check if all motors, clutches and sensors are correctly connected. The test briefly activates the actuators and clutches and measures the current.

To run a system test:

    1.  In the Settings menu, tap the [Diagnostics] tab.

    2. Tap [System test].

    3. Remove all documents and envelopes and close all covers before starting the diagnose.

    4. Tap [Start test].

    5. When the test is finished, the Status report is shown, showing a list of all problems found during diagnostics. If tests fail, contact your service organization.

Date created:
09/26/2013 13:55:38
Last updated:
11/27/2017 03:36:12
DS-75i, DS-95i