When the maxiFeeder is used at an automatic separation feeder, the separation is set automatically.
The maxiFeeder can also be used on a feeder position with a manually adjusted separation.
To adjust, proceed as follows:
    1. Remove the document feeder trays 2 and 3.

      1. Maxifeeder Document Separation
      2. Note

        The lowest feeder is feeder 1.

    2. Squeeze the two blue handles A and B and shift the feeding plate C as far as possible to the front.
    3. Push knob D forward until it clicks.
    4. Place a document/BRE on the feeder tray and slide it in the system till the leading edge is not visible anymore. Turn knob D counterclockwise if the separation is set to narrow.
    5. Push the document/BRE between the rollers.

    6. Turn knob D clockwise to get more resistance and counterclockwise if the separation is set to narrow.
      The separation is adjusted correctly when a slight resistance is felt on the document/BRE.

    7. Pull knob D back when ready.

    8. Replace the document feeder trays 2 and 3.

Date created:
08/30/2013 11:53:50
Last updated:
08/01/2017 15:20:37
Product(range):
DS-75i, DS-95i
Print