1. Select Create Job from the Job screen. The Job Name must be exactly the same as the Job Name on the DS-1200.
    2. When the Main Document has been chosen, select Settings and set the Hopper Feed Mode to External. Save the settings. This will then direct the document to the FFPD.
    3. In the same Document Settings dialog, select Edit Advanced and ensure Select ID is set to Auto.

      1. If required, create Enclosures and select output settings as described in the standard User Guide.

    4. When all settings are complete, save the job to your required name. It will now be available for use in the Job list.
      1. The Job Name must be exactly the same as the Job Name on the DS-1200 G4.

      2. If an Insert Feeder is fitted and an insert is specified in the job, this will be indicated in the icons on the Run screen.
      3. 1 - Added document from Insert Feeder

        2 - Main document from FFPD

Date created:
10/13/2017 09:40:46
Last updated:
10/16/2017 05:51:13
Product(range):
DS-200i
Print