1. Unit Fine Tuning

    The fine tuning options available will depend upon whether a Versatile Feeder or Flex Folder is fitted. Note also that settings available will depend upon user access rights (see User Access Rights).

    1. Select the document or insert icon on the machine graphic in the Run screen to display the fine tuning screen.

  2. Hopper Fine Tuning

    1. From here you can adjust hopper settings.

      1.   
      2. Select the document or insert icon on the machine graphic in the Run screen to display the fine tuning screen.

        Hopper Fine Tuning
        From here you can adjust hopper settings. You can change:

        1. Feed Always or not. If you select Off, the unit is disused until it is turned back on again.
        2. Whether doubles de-tection is turned on or off. Turn off if booklets or very thick inserts are being fed. If turned on, select whether Optical or Mechanical detection, or Auto (software de-cides).

        3. Optical doubles sensitivity (valid only if Optical Doubles On is selected). Low set-ting is more tolerant to high contrast printing.

        4. Amount of deskew; use higher settings only when necessary – machine operates faster on lower settings.

        5. Only for Reading units. Reset Seq. Count - if Sequence OMR marks are being used and the job is disrupted for any reason, select this button to reset the se-quence.

           
        6. Only for Reading units. Retrieve CIS Image - if selected, images of the label as seen by the CIS reader will be displayed. The images will be of the final 2 documents in the group and can be useful for error checking by confirming that the whole label was read, for example, or comparing the 2 images.

All fine adjustments apply only to the current job and will not affect any other jobs

Date created:
03/18/2013 02:57:22
Last updated:
03/18/2013 08:17:17
Product(range):
DS-200
Print