• All rollers and feed wheels should be cleaned periodically to remove any residue picked up from processing printed material.

    To clean the rollers and feed wheels, use a lint-free cloth dampened with water. This method will normally be sufficient, however for more stubborn soiling, the use of a foam-type surface cleaner may help.

    Clean the full width and circumference of all visible rollers and feed wheels.

  • Note

    Most rollers and feed wheels may be turned by hand, though some may be quite rigid.

  • Caution

    Avoid using strong spirit-based cleaners or solvents, as these may damage the rollers and feed wheels.

Date created:
04/10/2020 05:59:20
Last updated:
06/11/2020 15:49:18
Product(range):
DS-200i
Print