1. The separator prevents more than one paper/form being fed at a time. The adjustment wheels for both the 500-Sheet and 1000-Sheet hoppers are located on the operator side of the Flex Folder.

    1. To access the separator adjustment wheels, first open the Flex Folder operator side cover as shown below.

    2. Turn the adjustment wheels to open or close the gap, use the markers indicated in image below as a visual aid to help achieve the required setting.

      1. Note

        The separator adjustment wheels for both the 500-Sheet and 1000-Sheet hoppers are identical, however the adjustment wheel for the 1000-Sheet hopper is orientated vertically.

    3. Adjust the separator gap according to the following:

      • Single Sheets (up to 100gsm) - The separator roller should just contact the pad below. Increase the gap slightly if sheets feed erratically.
      • Thicker Forms - Slide a form into the gap and adjust the wheel until the separator just grips it.
    4. Close the Flex Folder operator side cover once the desired adjustments have been made.

Date created:
04/10/2020 05:42:26
Last updated:
06/11/2020 15:49:15
Product(range):
DS-200i
Print