If a CIS Reader is fitted to a Flex Folder, it must be adjusted to align with the barcode label on the form being processed.

    1. To access the CIS Reader adjustment tabs, first open the Flex Folder operator side cover as shown below.

    2. To adjust the CIS Reader for top read, slide the blue adjustment tab to the left or right side as shown below according to where the label is printed on the form/document for the job being processed.

      1. Note

        The CIS Reader for top read on the upper station is always in a fixed position, and can only read portrait orientated forms/documents.

      2. Caution

        Always position the CIS Readers for both top and bottom reader fully to left or right side. Do not position the reader in-between, as this can cause bad read errors.

    3. To adjust the CIS Reader for bottom read, slide the blue adjustment tab to the left or right side as shown below according to where the label is printed on the form/document for the job being processed.

    4. Close the Flex Folder operator side cover once the desired adjustments have been made.

      1. Note

        For further assistance on CIS Reading, see section Reading Specifications.

Date created:
04/10/2020 05:43:09
Last updated:
06/11/2020 15:49:15
Product(range):
DS-200i
Print