Both the machine and PC must be switched on independent of each other.

    1. To power on the machine, first press the I/O toggle switch at the rear bottom right panel of the Insert Head as shown below.

    2. Then press the front I/O power button located at the front bottom left panel of the Insert Head as shown below.

      1. Note

        A green LED indicates that the machine is switched on/powering on.

    3. Open the cupboard below the Insert Head to access the PC, and press the I/O button on the PC to power it on.

      1. Note

        The system can be set to automatically power-down after 60 minutes of idling (no activity), see section System Options for further assistance.

      2. Caution

        Pushing and holding down the front I/O power button for one second will power-down both the machine and PC.

Date created:
04/09/2020 13:17:01
Last updated:
06/11/2020 15:49:08
Product(range):
DS-200i
Print