1. After pressing Finger Sequence, the machine will feed an envelope into position. 

    This allows the operator to set the order of the insertion fingers in the envelope as demonstrated below.

  2. Make any adjustments as necessary by following the procedure below:

    1. Open the operator side cover to view the fingers.

    2. Select the required Finger Sequence from the list of options as shown below and press Ok.

    3. Press the Fingers button to operate the fingers and to view the insertion fingers adjustments in the envelope.

    4. If required, press Revert to revert back to the original Outers first (default) finger sequence setting.

    5. Press Exit once the desired settings have been made.

Date created:
04/10/2020 04:13:34
Last updated:
06/11/2020 15:49:10
Product(range):
DS-200i
Print