1. Although the machine may operate in sunlight, it is not designed for use in direct sunlight, or where sunlight is exposed to the machine through windows or skylights. The light-sensitive sensors can be affected in these conditions. It is therefore rec-ommended to:

    a) Locate the machine out of direct sunlight
    b) Protect the machine from direct sunlight using blinds or similar blocking devices.

    If the machine can only be located where it may be exposed to direct sunlight, then please contact Technical Support department, who may be able to advise on the use of blocking material on the inside of the Perspex cover where necessary.

    Important Notes:
    1. All stationery should be allowed to acclimatise near the machine for at least 24 hours before use to prevent rapid absorption of moisture in the material, or con-densation forming on the machine. Failure to acclimatise the material may cause pre-gumming of envelopes or otherwise impair machine performance.

    2. The machine will function with humidity levels lower than 30% RH, but high lev-els of static may be generated, impairing machine performance.

    3. The machine will function with humidity levels higher than 80% RH, but moisture absorption into the material may impair machine performance.

    4. Condensation must not be present under any circumstances.

    5. The machine will function at temperature levels above 28 deg C (82 deg F) and below 18 deg C (64 deg F). However, temperature levels outside these limits may impair the machine performance.

    6. Material processed directly from laser printers may have high levels of static causing material to stick together. If double feeding occurs, then Hi-Grip separators may be required - contact IPSS department.

Date created:
07/24/2013 17:45:41
Last updated:
08/27/2013 17:13:08
Product(range):
DS-200
Print