1. Open the folder top cover and clean the sensors indicated.

      For the two sensors shown side-by-side, direct the nozzle of the airduster into the gap at the front of the them and spray liberally.

      1.   
    2. Open the side cover and raise the two transport assemblies so that they latch.

      Swing forward the vertical transport assembly and clean the sensor halves indicated.

      These are not easy to see, and a separate light such as a torch may help.

      When returning the transport assemblies, ensure that they latch back into place properly.

      1.    
Date created:
03/12/2013 08:08:16
Last updated:
03/18/2013 08:17:47
Product(range):
DS-200
Print