1. Slacken the black knob next to the side guides (arrowed) and move the guides to give 1-1.5mm clearance each side of the enclosure. Tighten the knob.
      1.   
    2. Slacken the black knob under the backrest (arrowed) and move it forwards to support the enclosures as shown. Ensure the enclosures are directed down into the feed rollers. Tighten the knob.
  1. Adjusting the separator

    1. The separator prevents more than one enclosure being fed at a time. To adjust the separator, turn the knob on the back of the feed hopper. Clockwise decreases the gap, anti-clockwise increases it.

      To set the separator gap, empty the hopper, then slide an enclosure into the gap and turn the knob until the separator will just grip the enclosure as you withdraw it. To help you establish an initial setting, there is a setting gauge on the adjustment knob.

    2.  

      1.    
    3.  

      1. To help you establish an initial setting, there is a setting gauge on the adjustment knob.

        See Setting the Separator Gap

        If the envelopes feed erratically, try a backrest angle in-between.

        For problem enclosures, the feed rollers can be changed to optional alternatives; see Changing the feed tyres

        See following page for load capacities of different stationery types. Note: these are a guideline only - actual quantities may vary. The label on the side quide will also provide an indication.

      2. 1000 Sheets of 80gsm (20lbs bond) or 400 BRE (DL)
      3. 130 x 2.5mm A5 Booklets
      4. 40 x 6mm A4 Booklets
      5. 500 x 0.5mm A5 Booklets
Date created:
03/18/2013 03:52:48
Last updated:
03/18/2013 08:17:35
Product(range):
DS-200
Print