You will now define the fold settings.
    1. The machine will automatically select the optimum fold type. If you wish to change this, deselect ‘Auto’ and set the required fold.

      The machine may not perform properly if you change the fold type wrongly

      If you wish to make adjustments to the fold lengths, or just check them, press the Adjust fold button.
      1.  
    2. Make adjustments as required and press the OK button. Note: for Max. & Min. fold lengths for each fold plate, see ‘Technical Specifications'.

      1.  
    3. If you wish to make adjustments to the collation mode or Max no. of sheets folded together, press the Edit advanced settings button.
      1.  
    4. Choose whether to collate leading edges of documents as they feed through the folder, then folded together without entering the accumulator, or to feed separately into the accumulator before folding. Sheets are fed singly by default, so each sheet is folded and inserted separately. Set max number for folding together. Groups bigger than this will be split into a) max number, followed by b) remainder.

      The maximum that can be fed into the accumulator defaults to 9 (Max. collate), but can be up to 25.

        This will depend upon the paper type.
      1.  
      2. Multi-envelope mode allows two separate jobs to be run in succession using the same document set. If set to ‘Split Oversize’, this splits, folds and inserts as for ‘Max Fold’ described above. If set to ‘Divert Oversize’, all groups numbering greater than the number set in ‘Divert/Split Threshold’ will be diverted to the divert tray, and if set to ‘Divert Undersize’, the same will apply for groups below the threshold.


        The machine is then stopped, the job is changed and the forms in the divert tray are put back into the document set, and the new job is run. ‘Error handling’ allows the option of stopping the machine with the forms in the accumulator, or to continue, allowing the operator to intervene.

        When you have finished, fold settings are now complete and the screen will show that this is ticked.

        You will now define the output settings.

        Handling of folded forms

        Shown below are handling of oversized/undersized groups under different circumstances.

         

        Multi envelope mode

        Maximum Fold

        Maximum in accumulator

        Divert/Split threshold

        Comment

        Split oversized     When folding, the group or sub-group is folded on reaching this limit

        When not folding or diverting, the group or subgroup is ejected towards divert or head unit on reaching this limit  

        Not used  Mechanical limits of folder and accumulator for given stationery
        Divert oversized

        Not used (As for Split Oversize if oversize not yet detected).

         
        Not used (As for Split Oversize).

        The complete group is assembled in the accumulator and then diverted if prime document count is equal or greater

         
        Typically used for diverting large groups for re-processing into a larger envelope
        Divert undersized Not used (As for Split Oversize if undersize not yet detected). Not used (As for Split Oversize).  The complete group is assembled in the accumulator and then diverted if prime document count is less than this limit Typically used for diverting small groups for re-processing into a smaller envelope
Date created:
03/18/2013 03:40:06
Last updated:
03/18/2013 08:17:26
Product(range):
DS-200
Print