1. To clean the brushes and sponge of the feeder:

    1. Open the feeder and push the left of the upper blue release lever to raise the upper drive assembly.

    2. Pull up the brush release lever.

    3. Raise the brush and lift the complete brush holder assembly.

    4. Lift the metal retainer to remove the sponge.

      1. Remember its direction.

    5. Clean the sponge and the brush.

    6. Re-install the sponge and retainer.

    7. Put the brush back and push the release lever back down until it snaps into place.

    8. Push down on the upper drive assembly until it locks back into position.

Date created:
03/12/2014 22:39:00
Last updated:
10/17/2014 19:43:04