User Guide

Contents

  1. Read this First
    1. Safety
    2. Declaration of Conformity (EU only)
    3. About this manual
  2. Introduction
    1. Introduction
      1. Introduction
  3. Description of machine
    1. Description of operation
    2. Identification of parts
    3. Switching on the machine
  4. Control Panel
    1. The Job Screen
    2. The Run Screen
      1. The Run Screen displayed
      2. Testing the mailset
      3. Present at exit
      4. Finger sequence
      5. Envelope Stop Position
      6. Finger Adjust
      7. Counter settings
      8. Envelope Inserter
      9. Adjusting the Document Unit settings
      10. Remote Assistant
    3. The Menu Screen
  5. Running an existing job
    1. Running an existing job
  6. Switching the user
    1. How to switch the user
    2. User Access Rights
  7. Creating a job
    1. Creating a job
    2. Creating the Job Settings
      1. Creating the Job Settings
      2. Defining the mailset
      3. Defining the document placement settings
      4. Defining the fold
      5. Defining the output settings
      6. Saving the job
    3. Creating an envelope
    4. Creating a document
    5. Creating an enclosure
  8. Loading the paper hoppers
    1. Loading the envelope hopper
    2. Loading the feeder hopper
    3. Loading the tower folder hoppers
    4. Daily Mail Tower Folder
      1. Daily Mail
      2. Using Daily Mail
    5. Adjusting the catch tray
  9. Operator Maintenance
    1. General Cleaning
    2. Cleaning the sensors
      1. Cleaning the sensors
      2. Cleaning the sensors of each module
    3. Clearing paper jams
    4. Maintaining the Wetter System
  10. Technical Specification
    1. Inserter head
    2. Tower Folder
    3. Insert Feeder (Single, Twin & Reading)
    4. Feeder Folder
    5. Mechanical & Electrical
  11. Glossary of terms
    1. Glossary of terms
  12. INF Output Conveyor - appendix
    1. Introduction
      1. Introduction
    2. Description of machine
      1. Machine options
      2. Description of INF Conveyor
      3. Layout Configurations
    3. Setting up the machine
      1. INF Conveyor adjustments
      2. Sorter adjustments
    4. Using the machine in IMOS
      1. Using the machine in IMOS
      2. Mail Sorting
      3. Output Placement
      4. Output settings
      5. Franking
    5. Operator Maintenance
      1. Cleaning Sensors
      2. INF Conveyor Sensors
      3. Cleaning the conveyor belt
    6. Technical Specification
      1. Physical sizes
      2. Electrical
    7. Troubleshooting Guide
      1. Troubleshooting Guide