User Guide

DS-90

Contents

  1. Read this First
    1. Warning
    2. About this manual
    3. Health Safety and Environment
    4. Country Specific Conditions
    5. End of Life
    6. EMC / FCC Classification
  2. Meet your Document System
    1. Overview
    2. Operating Controls
    3. Control Panel
    4. Install document feeders
    5. Power Up
    6. Home Menu
    7. Job Info
    8. Side Guides
    9. Document Orientation
    10. Filling the Document Feeder Tray
    11. Loading Envelopes
    12. Filling the sealing liquid reservoir
    13. Shut Down the System
  3. Options
    1. MaxiFeeder
    2. MaxiFeeder - Installing
    3. Adjust the maxiFeeder Side Guides
    4. Adjust the maxiFeeder Document Separation
    5. Feeding documents (MaxiFeeder)
    6. High Capacity Document Feeder (HCDF)
    7. HCDF - Installing
    8. Adjusting the HCDF Side Guides
    9. Document Separation for the HCDF
    10. Feeding documents (HCDF)
    11. VersaFeeder (VF-3)
    12. Installing the VersaFeeder
    13. Operating controls (VersaFeeder)
    14. Adjusting the Side Guides (VersaFeeder)
    15. Adjusting the Document Separation (VersaFeeder)
    16. Hopper Capacity (VersaFeeder)
    17. Support for Curved Reply Envelopes (option for VersaFeeder)
    18. Power Stacker Support
    19. High Capacity Envelope Hopper (EF-4)
    20. High Capacity Conveyor Belt (CS-2)
    21. Installing the High Capacity Conveyor Belt
    22. Operating the High Capacity Conveyor Belt
    23. Catch Tray
    24. Catch Tray on Left Hand Side
    25. insert'n Frank / insert'n Mail
    26. Mail Piece Production Control (MPPC)
  4. Processing Mail Sets
    1. Automatic or Manual Job
    2. Processing a Basic Mail Set
    3. Processing a mail set with BRE or inserts
    4. Document Separation
    5. Adjustment of the Document Stoppers
    6. Processing Daily Mail
    7. Test Run
    8. Adjusting the Address Position
    9. Adjusting the Envelope Insert Fingers
    10. Verifying the Insert Position
  5. Working with Jobs
    1. What is a job
    2. Creating a new job
    3. Performing a test run
    4. Adjusting the Envelope Position
    5. Using a job
    6. Editing a job
    7. Copying a job
    8. Deleting a job
    9. Job settings
    10. Envelope settings
    11. Document settings
    12. Fold settings
    13. Reading settings (option)
    14. Double feed control settings
    15. Job name
    16. Exit select settings
    17. Mailing/Franking settings (option)
    18. Mail Piece Production Control settings (option)
  6. Advanced Settings
    1. What are Advanced Setting?
    2. Opening the Advanced Settings
    3. Changing the Display Settings
    4. Viewing System info and Software versions
    5. What are licensed options?
    6. Activating an option
    7. Test Menu
    8. Running diagnostics
    9. Job Settings (Supervisor)
    10. Flap Closer Offset
    11. Envelope Clearing
    12. System Output
    13. Changing Document Offset
    14. Changing BRE Offset
  7. Reading
    1. Introduction
    2. Reverse reading
    3. Document Orientation
    4. BCR Code Description
    5. Reading a configuration sheet (BCR only)
    6. Running a BCR test
    7. OMR Code Description
    8. Running an OMR test
    9. 2-track OMR
  8. Online Services
    1. Online Services
    2. Start-up Online Services
    3. Connecting to the server
    4. Viewing the history
    5. Viewing messages
    6. Installing a new job or new software
    7. Configuration Menu
    8. Setting the telephone number
    9. Setting the prefix
    10. Selecting the country
    11. Entering date and time
    12. Setting the dial tone detection
    13. Setting the modem volume
  9. Operator Maintenance
    1. Maintenance Schedule
    2. Clean and replace brushes
    3. Replace or clean moistening cloth
    4. Resetting Photocells
  10. Fault Finding
    1. Error Messages
    2. Clearing Stoppages
    3. Envelope Hopper
    4. Exit, Sealing and Inserting Area
    5. Lower Envelope Track
    6. powerFold
    7. flexFeed
    8. Collating Area
    9. versaFeeder
    10. Operator Troubleshooting
    11. Trouble Shooting Table
  11. Specifications
    1. Technical Specifications
    2. Hopper and Feeder Capacity
    3. Configuration Dimensions
    4. Document and Insert Specifications
    5. Envelope and Document Set Specifications
    6. maxiFeeder Specifications
    7. versaFeeder Specifications
    8. High Capacity Envelope Hopper Specifications
    9. High Capacity Conveyor Belt Specifications
  12. Terminology
    1. Terminology