1. Feeding a stack of mail pieces:

    1. Arrange the mail pieces according to their size (the largest/heaviest letters beneath).

    2. Fan the envelopes to separate them.

    3. Bevel the edge of the stack.

    4. Place the envelopes in the feeder their upper edge resting against the rear guide.

      1. Ensure that all the envelopes are stacked along the rear guide, from largest to smallest.

    5. Adjust the side guide for large envelopes. To adjust the guide, push it gently to rest against the envelopes, without pressing.

      1. Envelopes flaps must be closed, not nested. Do not try to seal self-adhesive envelopes.
  2. Thickness Setting:

    1. Depending on the thickness of your envelopes, you may have to adjust the thickness setting of the Feeder. Change this setting to process several stacks of thin envelopes or to remove thick envelopes blocked at the entrance of the mail path.

    2. Open Feeder Cover.

    3. Change lever position:

      1. - 1 for thin envelopes

        - 2 for thick envelopes.

    4. Close the Feeder Cover.

Date created:
03/12/2014 22:21:46
Last updated:
10/17/2014 22:56:00
Product(range):
IN-750
Print