1. Open the feeder top covers at the front, if the feeder is the first station. If a subsequent station, open the side cover and approach from the side.

      Picture is viewed looking towards the front.

      Clean the sensor arrowed. The upper half is located on a bracket above the lower half.

    2. Picture is viewed looking down the feed hopper.

      Insert the airduster nozzle exactly as indicated and push it forward about 20mm. Spray liberally to claean the 2 sensors arrowed.

    3. Open the side cover and push the lowermost lever forward to lower the conveyor.

      Clean the sensor located in the centre of the track as shown, with the upper half directly above it.

Date created:
03/12/2013 08:07:34
Last updated:
03/18/2013 08:17:46