If you want to use an existing job:


    1. Open the job list.

    2. Tap the icon of the job you want to use.

    3. Load the feeders as shown on the display.

    4. Tap [1x] to create an example mail set, see Example mail set.
    5. Select an exit for the example mail set.

    6. Check the example mail set.

    7. If example mail set is OK: tap [Start].

      If the example mail set is not OK: adjust the address position or envelope stop position or check and re-adjust the job settings.

      1. If desired tap the counter button to set the counters. See Counter settings.

    8. Tap [Start] to start the job.

    9. Press the [Stop] button to finish the job.

    10. Tap [Job list] to return to the job list.

Date created:
01/08/2013 14:19:31
Last updated:
04/11/2016 13:13:56
Product(range):
Print

Contents

  1. Read this First
    1. Safety
    2. Declaration of Conformity (EU only)
    3. About this manual
  2. How this Help Works
    1. Help Menu
    2. User Guide
  3. Meet your Document System
    1. Introduction
    2. Operating Controls
    3. Control Panel
    4. Power Up
    5. How to Operate the Touch Screen
    6. Use a Web Browser
    7. What is a Job?
    8. Job List
    9. Job Overview
    10. High Capacity Document Feeder (HCDF)
    11. MaxiFeeder
    12. Installation of the Side Exit
    13. Installation of the High Capacity Vertical Stacker (HCVS-1)
    14. Shut Down the System
  4. Working with Jobs
    1. Introduction
    2. Use an Existing Job
    3. Create a New Job
    4. About Automatic Jobs
    5. Create an Automatic Job
    6. Create a Manual Job
      1. Introduction
      2. Create a Manual Job
      3. Mail Settings
        1. Envelope
        2. Main document
        3. Switch DFC on or off for feeders
        4. Enclosure
      4. Fold Settings
      5. Exit Settings
      6. Change the Counter Settings
      7. Finish the Job Definition and Start the Job
    7. Create a test mail set
      1. Create a Test Mail Set
      2. Adjust the Address Position
      3. Adjust the Envelope Insert Fingers
      4. Verify the Insert Position
    8. Mail Sets
      1. Adjust the Separation of Special Feeders
      2. Process a Mail Set with BRE or Inserts
      3. Process Mail Sets with Daily Mail
      4. Create a Job with Custom Envelopes
      5. Create a Job with Custom Documents
      6. Process Mail Sets with insert'n Frank / insert'n Mail
    9. Change to Another Feeder Tray
    10. Link Feeder Trays
    11. Edit a Job
    12. Save a Job
    13. Delete or Move an Enclosure
    14. Copy a Job
    15. Delete a Job
    16. Rename a Job
    17. Lock a Job
  5. Loading the System
    1. Document Orientation
    2. Document Feed Trays
      1. Install the Document Feed Trays
      2. Adjust the Side Guides
      3. Load Documents
      4. Document Separation
      5. maxiFeeder
        1. Adjust the maxiFeeder Side Guides
        2. Adjust the maxiFeeder Document Separation
        3. Load Documents (maxiFeeder)
      6. High Capacity Document Feeder
        1. Adjust the Side Guides
        2. Load Documents (HCDF)
    3. Loading Envelopes
    4. Adjust the Side Guides and Envelope Separation
    5. Fill the Sealing Liquid Reservoir
  6. Settings menu
    1. Open the Settings Menu
    2. The Settings Menu Supervisor
    3. Supervisor Settings Menu
      1. Open the Settings Menu (Supervisor)
      2. Configuration
        1. Configuration
        2. System Info
        3. Software Overview
        4. Licensed Options
        5. Add a Licensed Option
      3. Settings
        1. Settings
        2. Localisation
        3. Display Settings
        4. Date-time
        5. Job Settings
        6. Connectivity
        7. License information
      4. Diagnostics
        1. Diagnostics
        2. System test
        3. Maintenance
      5. Reading
        1. Reading
        2. OMR code definition
        3. BCR 1D Configuration Sheet
        4. BCR 1D Code Definition
        5. BCR 2D Configuration Sheet
        6. BCR 2D Code Definition
        7. Last Image
      6. History
  7. Connect the System to the Internet
    1. Options for Connection
    2. Set up a Wired Connection
    3. Set up a Wireless Connection
    4. Test the Connection
  8. Reading
    1. Introduction
      1. Code Types
      2. General Requirements for Printing Codes
    2. OCR Code Description
    3. BCR Code Description
    4. OMR Code Description
    5. Flex Reading Code Description
    6. Create Jobs with Reading
      1. Create a BCR Job
        1. Create a BCR Job
        2. Read a Configuration Sheet
      2. Create an OMR Job
      3. Create an OCR Job
      4. Create a Flex Reading Job
    7. Reading Settings
  9. Operator Maintenance
    1. Maintenance Schedule
    2. Clean and Replace Brushes
    3. Replace or Clean Moistening Cloth
    4. Calibrate Photocells
  10. Fault Finding
    1. Messages
    2. Clearing stoppages
      1. Clearing Stoppages
      2. Lower Envelope Track
      3. Feeder area
      4. Collating Area
      5. Folder area
    3. Operator Troubleshooting
    4. Troubleshooting
  11. Specifications
    1. Technical Specifications
    2. Hopper and Feeder Capacity
    3. Configuration Dimensions
    4. Document and Insert Specifications
    5. Envelope and Document Set Specifications
    6. maxiFeeder Specifications
    7. High Capacity Vertical Stacker Specifications
  12. Terminology
    1. Terminology